一本大道AV伊人久久综合,亚洲另类图片制服自拍小说区

BG Digital Force Gauge

Measures Tension &
Compression Force (Push - Pull)
11 Ranges up to 500 lbs
Measures Push / Pull Force

The BG Series Digital Force Gauge is an advanced force measurement solution, with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings.

The BG can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator.

The BG Series force gauges have reversible housings that allow the user to use the gauge with the load cell shaft pointing up or down, without the inconvenience of upside-down buttons and display. The housing for Series BG and Series EG gauges is reversible by separating the two halves and reassembling them with just one connector - an extra bit of engineering that will make your testing setups quicker and more efficient.

Optional Equipment

Hi / lo limits indicator
Set limit conditions for a test - the indicator will display red lights for high and low limits, and a green light to indicate passing.

Overload protection module
Protects the force gauge against overloads during motorized tests, adjustable from 20 - 110% of gauges full capacity. For use with ESM motorized test stands.

Set point cable
Stops test stand travel at programmable high and low set points for tension and compression forces. For use with ESM motorized test stand.

Output cable
Send test data to a PC, statistical printer, or other data collector for further analysis.

Features

RS-232, Mitutoyo and analog outputs

GCL-Gauge Control Language for full computer control

Automatic timed output on RS-232

Dual set points with outputs

Averaging mode for average readings over time

External trigger for contact or switch testing and data capture

General purpose I/O for external device control

Programmable analog and digital filters

Selectable units of measurement

Programmable default configuration

Peak memory for tensile and compressive forces

Push-button calibration

Battery or AC operation

Programmable automatic shutoff

Reversible aluminum housing for handheld use or test stand mounting

Same housing size for all capacities

Includes NIST-Traceable Calibration Certificate

3 Year Warranty

Force Ranges

Model	Capacity	Resolution
BG-012	0.12 lb 50 g 0.5 N	0.00005 lb 0.02 g 0.0002 N
BG-025	0.25 lb 100 g 1 N	0.0001 lb 0.05 g 0.0005 N
BG-05	0.5 lb 250 g 2.5 N	0.0002 lb 0.1 g 0.001 N
BG-2	2 lb 1 Kg 10 N	0.001 lb 0.0005 Kg 0.005 N
BG-5	5 lb 2.5 Kg 25 N	0.002 lb 0.001 Kg 0.01 N
BG-10	10 lb 5 Kg 50 N	0.005 lb 0.002 Kg 0.02 N
BG-20	20 lb 10 Kg 100 N	0.01 lb 0.005 Kg 0.05 N
BG-50	50 lb 25 Kg 250 N	0.02 lb 0.01 Kg 0.1 N
BG-100	100 lb 50 Kg 500 N	0.05 lb 0.02 Kg 0.2 N
BG-200	200 lb 100 Kg 1000 N	0.1 lb 0.05 Kg 0.5 N
BG-500	500 lb 250 Kg 2500 N	0.2 lb 0.1 Kg 0.1 N